Zhimin.Liu/Cluster
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity

feat(Alarm/bg):Replace SANY alarms in tips, update backgrand

Browse Source
This commit is contained in:
zhimin.liu
2026-05-14 12:08:48 +08:00
parent b5aaa2caf1
commit 7f3faae414
12 changed files with 290 additions and 7 deletions
Download Patch File Download Diff File Expand all files Collapse all files

44
clusterApp/include/Protocol/MainBoard_IIC_App.h
View File

@@ -182,6 +182,7 @@ enum
MENU_LEFT_VOICE_AI,
MENU_LEFT_VOICE_PHONE,
MENU_LEFT_ACC,
MENU_LEFT_SPEED,
MENU_LEFT_NUM,
};
@@ -626,4 +627,47 @@ enum
FACE_END, /*结束*/
};
typedef enum
{
ID_ALARM_NULL = 0, /* [无报警信息] */
ID_ALARM_CANNOT_AUTO_DRIVE, /* 无法执行自动驾驶 */
ID_ALARM_TAKE_OVER_VEHICLE, /* 请接管驾驶车辆 */
ID_ALARM_DRIVER_NOT_TAKE_OVER_STOPPING, /* 驾驶员未接管车辆，停车中 */
ID_ALARM_AUTO_DRIVE_SYS_FAULT, /* 自动驾驶系统故障 */
ID_ALARM_CHARGING_DO_NOT_START, /* 充电中，请勿启动车辆 */
ID_ALARM_BATTERY_SWAP_UNLOCKED_DO_NOT_OPERATE, /* 换电装置未锁止，请勿操作车辆 */
ID_ALARM_DECELERATION_WARNING_BRAKE, /* 减速预警，请制动 */
ID_ALARM_COLLISION_WARNING_BRAKE, /* 碰撞预警，请制动 */
ID_ALARM_ENERGY_RECOVERY_OFF, /* 能量回收关闭 */
ID_ALARM_BATTERY_PREHEATING_DRIVE_SAFE, /* 电池预热中，请安全行车 */
ID_ALARM_BATTERY_PREHEATING_DRIVE_SLOW, /* 电池预热中，请缓速慢行 */
ID_ALARM_BATTERY_TEMP_LOW_WAIT_HEAT_NO_DRIVE, /* 电池温度低，请等待加热，建议不行车 */
ID_ALARM_SHIFT_N_THEN_IGNITE, /* 请挂N挡再点火 */
ID_ALARM_COAST_RECOVERY_LEVEL1, /* 滑行能量回收：1级 */
ID_ALARM_TRANSMISSION_SELF_LEARNING_KEEP_N, /* 变速箱系统自学习中，请保持N档 */
ID_ALARM_TRANSMISSION_SELF_LEARNING_DONE_RESTART, /* 变速箱系统自学习完成，请重启车辆 */
ID_ALARM_TRANSMISSION_SELF_LEARNING_FAIL_RESTART, /* 变速箱系统自学习失败，请重启车辆 */
ID_ALARM_MOTOR_BRAKE_LIMIT_REACHED, /* 电机制动已达上限 */
ID_ALARM_SPEED_DOWNHILL_ON, /* 定速下坡功能已开启 */
ID_ALARM_MULTI_GEAR_SHIFT_FAIL_BRAKE_TAKEOVER, /* 多级怀挡调节功能失效，请踩制动踏板接管 */
ID_ALARM_SPEED_DOWNHILL_OFF, /* 定速下坡功能已关闭 */
ID_ALARM_VEHICLE_SLIP_USE_DIFF_LOCK, /* 车辆严重打滑，请使用差速锁 */
ID_ALARM_INSPECTION_SWITCH_ON_4TH_GEAR_FIXED, /* 过检开关开启，第4档固定 */
ID_ALARM_BRAKE_THEN_START, /* 请踩刹车再启动车辆 */
ID_ALARM_BRAKE_THEN_SHIFT, /* 请踩刹车再挂挡 */
ID_ALARM_SPEED_TOO_HIGH_CANNOT_LOCK_SLOW_TO_5KMH, /* 车速过高无法挂锁，请减速至5km/h以下 */
ID_ALARM_AIR_PRESSURE_SENSOR_FAULT_CONTACT_SERVICE, /* 气压传感器故障，请联系售后 */
ID_ALARM_DRYER_VALVE_STUCK_CONTACT_SERVICE, /* 干燥器电磁阀卡滞，请联系售后 */
ID_ALARM_DRYER_VALVE_NO_RESPONSE_CONTACT_SERVICE, /* 干燥器电磁阀无响应，请联系售后 */
ID_ALARM_BATTERY_SYS_LIMIT_RECOVERY_CONTACT_SERVICE, /* 电池系统已限制回收，请联系售后 */
ID_ALARM_MOTOR_SYS_LIMIT_RECOVERY_CONTACT_SERVICE, /* 电机系统已限制回收，请联系售后 */
ID_ALARM_TRANSMISSION_SYS_LIMIT_RECOVERY_CONTACT_SERVICE,/* 变速箱系统已限制回收，请联系售后 */
ID_ALARM_ABS_LIMIT_RECOVERY_CONTACT_SERVICE, /* 防抱死系统已限制回收，请联系售后 */
ID_ALARM_MOTOR_OVERSPEED_BRAKE, /* 电机超速，请刹车减速 */
ID_ALARM_LOW_PRESSURE_FUEL_PUMP_TEST_ACTIVE, /* 低压油泵测试功能已激活 */
ID_ALARM_CHARGE_PULL_HANDBRAKE, /* 充电请拉手刹 */
ID_ALARM_BATTERY_FIRE_ALARM_STOP_AND_EVACUATE, /* 电池火灾报警，请立即停车后远离车辆 */
ID_ALARM_COUNT /* 用于统计告警总数，可选 */
} Sany_AlarmId;
#endif // MAINBOARD_IIC_APP_H_INCLUDED

2
clusterApp/include/Protocol/MainBoard_IIC_Sys.h
View File

@@ -184,7 +184,7 @@ MbIicApi Un08 dstDataBuf[ID_FRAME_W_NUM][I2C_FRAMELEN-1];
#define DATA_FORWARD_VEHICLE_6_X srcDataBuf[ID_FRAME_R_0x0A][6].value /*前方车辆_6 位置坐标x*/
#define DATA_FORWARD_VEHICLE_6_Y srcDataBuf[ID_FRAME_R_0x0A][7].value /*前方车辆_6 位置坐标y*/
#define DATA_MENU_LEFT_ID srcDataBuf[ID_FRAME_R_0x0B][0].sbit35.b02 /*左侧菜单ID*/
#define DATA_MENU_LEFT_ID MENU_LEFT_SPEED // srcDataBuf[ID_FRAME_R_0x0B][0].sbit35.b02 /*左侧菜单ID*/
#define DATA_MENU_LEFT_VALUE srcDataBuf[ID_FRAME_R_0x0B][0].sbit35.b37 /*左侧菜单数值*/
#define DATA_MCU_BLT_OP_STATE 0 // srcDataBuf[ID_FRAME_R_0x0B][1].sbit02.b01 /*蓝牙电话MCU处理状态*/
#define DATA_MCU_BLT_OP_CURSOR srcDataBuf[ID_FRAME_R_0x0B][1].sbit35.b37 /*蓝牙电话MCU操作光标*/